{"title":"Veritas Hand Planes","description":"\u003cdiv\u003e\n\u003c\/div\u003e\n\n\n\n\n","products":[{"product_id":"veritas-small-shoulder-plane","title":"Veritas Small Shoulder Plane","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Veritas Small Shoulder Plane\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Designed for an easy grip and to sit nicely in your palm, the Veritas Small Shoulder Plane is easily controlled using one hand.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The lever cap wraps around the rear of the body, shrouding the blade adjustment mechanism so it does not obstruct the grip while acting as a comfortable rest for the palm. The through-hole and textured recesses cast into the side of the body provide grip points for fingers. The plane's adjustable toe lets you restrict the mouth for very fine shavings with minimum tear-out. Set screws along the side let you accurately position the blade so it requires no lateral adjustment when replacing the blade after sharpening.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The plane weighs 1 lb 2 oz and has a 6-1\/4\" long, 1\/2\" wide sole. The ductile cast iron body is accurately machined and ground so that the sole and sides are flat and square. The low bed angle of 15° combined with the 25° blade bevel results in a cutting angle of 40° for exceptional end-grain cutting. The lapped blade is 1\/8\" (0.125\") thick and 1\/2\" wide, and made of PM-V11 tool steel.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Made in Canada.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Specifications\n  \u003c\/h5\u003e\n  \u003cul style=\"margin-top:-2px;\"\u003e\n   \u003cli\u003e\n    Ductile Cast Iron Body\n   \u003c\/li\u003e\n   \u003cli\u003e\n    6-1\/4\" long  x 1\/2\" wide\n   \u003c\/li\u003e\n   \u003cli\u003e\n    15° bed angle\n   \u003c\/li\u003e\n   \u003cli\u003e\n    1\/2\" wide x 1\/8\" thick blade with 25° bevel\n   \u003c\/li\u003e\n   \u003cli\u003e\n    PM-V11 blade\n   \u003c\/li\u003e\n   \u003cli\u003e\n    1lb 2oz\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch5\u003e\n   PM-V11 Steel\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   All of the Veritas bench, block and shoulder planes that we stock have PM-V11 steel blades. Veritas conducted extensive testing and determined that PM-V11 offers the best balance of hardness, edge retention and ease of sharpening in tool steels. It hones to a very fine edge and can easily be sharpened with commonly available sharpening abrasives.\n  \u003c\/p\u003e\n  \u003cp style=\"font-weight:bold; font-style:italic;\"\u003e\n   From Veritas\n  \u003c\/p\u003e\n  \u003cblockquote cite=\"https:\/\/www.leevalley.com\/en-us\/discover\/woodworking\/2020\/september\/the-pm-v11-story\"\u003e\n   PM-V11 is a powdered metal (PM) alloy. To form a PM alloy, constituent metals are melted and mixed together, then atomized, creating very small particles that cool and harden, forming a powder. This powder is screened to ensure consistent particle size, and then heated under pressure to form a billet. The billet is then rolled to the required thickness, ready to process as a conventionally smelted steel would be. The PM process yields a steel with a very fine grain structure that is uniform throughout.\n  \u003c\/blockquote\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Default Title","offer_id":50822130401562,"sku":"478262","price":233.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/478262-01d.jpg?v=1768343727"},{"product_id":"veritas-medium-shoulder-plane","title":"Veritas Medium Shoulder Plane","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Veritas Medium Shoulder Plane\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The shoulder plane is the ultimate tool for trimming a joint to a perfect fit. There is no better plane for trimming the shoulder of a tenon to perfection or for rebating work.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Veritas medium shoulder plane is proportioned for versatility; it measures 7\" long by 11\/16\" wide and weighs 2 lb. The ductile cast iron body is accurately machined and ground so that the sole and sides are flat and square.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   If you have ever used or even held a traditional shoulder plane, you will appreciate how this plane comes to hand. The unique lever cap with a pivoting knob lets you adjust the plane to fit your hand and preferred holding style. The concave knob rests in the web of your hand, giving you a secure grip without the need of a vise-like pressure.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The through-hole in the body adds to grip security but has to be experienced to be understood. The planes adjustable toe lets you narrow the mouth for very fine shavings with minimal tear-out. The low bed angle of 15° combined with the 25° blade bevel results in a cutting angle of 40° for exceptional end-grain cutting performance. Set screws along the side let you accurately position the blade and require no adjustment when replacing the blade after sharpening.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Blades are lapped, 1\/8\" (0.125\") thick, and come in PM-V11 tool steel.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Made in Canada.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Specifications\n  \u003c\/h5\u003e\n  \u003cul style=\"margin-top:-2px;\"\u003e\n   \u003cli\u003e\n    Ductile Cast Iron Body\n   \u003c\/li\u003e\n   \u003cli\u003e\n    7\" long  x 11\/16\" wide\n   \u003c\/li\u003e\n   \u003cli\u003e\n    15° bed angle\n   \u003c\/li\u003e\n   \u003cli\u003e\n    11\/16\" wide x 1\/8\" thick blade with 25° bevel\n   \u003c\/li\u003e\n   \u003cli\u003e\n    PM-V11 blade\n   \u003c\/li\u003e\n   \u003cli\u003e\n    2lb\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch5\u003e\n   PM-V11 Steel\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   All of the Veritas bench, block and shoulder planes that we stock have PM-V11 steel blades. Veritas conducted extensive testing and determined that PM-V11 offers the best balance of hardness, edge retention and ease of sharpening in tool steels. It hones to a very fine edge and can easily be sharpened with commonly available sharpening abrasives.\n  \u003c\/p\u003e\n  \u003cp style=\"font-weight:bold; font-style:italic;\"\u003e\n   From Veritas\n  \u003c\/p\u003e\n  \u003cblockquote cite=\"https:\/\/www.leevalley.com\/en-us\/discover\/woodworking\/2020\/september\/the-pm-v11-story\"\u003e\n   PM-V11 is a powdered metal (PM) alloy. To form a PM alloy, constituent metals are melted and mixed together, then atomized, creating very small particles that cool and harden, forming a powder. This powder is screened to ensure consistent particle size, and then heated under pressure to form a billet. The billet is then rolled to the required thickness, ready to process as a conventionally smelted steel would be. The PM process yields a steel with a very fine grain structure that is uniform throughout.\n  \u003c\/blockquote\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Default Title","offer_id":50822130532634,"sku":"478256","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/478256-01.jpg?v=1768343728"},{"product_id":"veritas-large-shoulder-plane","title":"Veritas Large Shoulder Plane","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Veritas Large Shoulder Plane\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   This specialized rabbet plane is the largest in the Veritas line of shoulder planes. Its size and mass make it perfect for trimming breadboard tenons, adjusting shoulders, or even paring down tenon cheeks. At 8-1\/4\" long and 1-1\/4\" wide, and weighing 3-3\/4 lb, it brings both authority and precision to larger work.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Typical shoulder planes can be awkward to handle and control; Veritas has overcome this by shaping a new lever cap that fits properly in the palm, incorporating a hardwood lever cap knob that pivots 180°, and adding a multi-positional front knob that can be mounted on the top or on either side. You can also grip the plane in the recesses cast into the side. This combination of features ensures a solid, comfortable grip for all users in all applications. Blades are lapped, 1\/8\" (0.125\") thick, and come in PM-V11 tool steel.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   For those who want the performance of a superior shoulder plane, this tool is the solution.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Made in Canada.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Specifications\n  \u003c\/h5\u003e\n  \u003cul style=\"margin-top:-2px;\"\u003e\n   \u003cli\u003e\n    Ductile Cast Iron Body\n   \u003c\/li\u003e\n   \u003cli\u003e\n    8\" long  x 1-1\/4\" wide\n   \u003c\/li\u003e\n   \u003cli\u003e\n    15° bed angle\n   \u003c\/li\u003e\n   \u003cli\u003e\n    1-1\/4\" wide x 1\/8\" thick blade with 25° bevel\n   \u003c\/li\u003e\n   \u003cli\u003e\n    PM-V11 blade\n   \u003c\/li\u003e\n   \u003cli\u003e\n    3-3\/4lb\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch5\u003e\n   PM-V11 Steel\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   All of the Veritas bench, block and shoulder planes that we stock have PM-V11 steel blades. Veritas conducted extensive testing and determined that PM-V11 offers the best balance of hardness, edge retention and ease of sharpening in tool steels. It hones to a very fine edge and can easily be sharpened with commonly available sharpening abrasives.\n  \u003c\/p\u003e\n  \u003cp style=\"font-weight:bold; font-style:italic;\"\u003e\n   From Veritas\n  \u003c\/p\u003e\n  \u003cblockquote cite=\"https:\/\/www.leevalley.com\/en-us\/discover\/woodworking\/2020\/september\/the-pm-v11-story\"\u003e\n   PM-V11 is a powdered metal (PM) alloy. To form a PM alloy, constituent metals are melted and mixed together, then atomized, creating very small particles that cool and harden, forming a powder. This powder is screened to ensure consistent particle size, and then heated under pressure to form a billet. The billet is then rolled to the required thickness, ready to process as a conventionally smelted steel would be. The PM process yields a steel with a very fine grain structure that is uniform throughout.\n  \u003c\/blockquote\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Default Title","offer_id":50822130762010,"sku":"478259","price":290.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/478259-01d.jpg?v=1768343730"},{"product_id":"veritas-low-angle-jack-plane","title":"Veritas Low Angle Jack Plane","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Veritas Low Angle Jack Plane\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Veritas Low Angle jack plane is ideal for shooting miters, working end grain, and initial smoothing. Comparable to a 62-1\/2 because of its generous size and weight,\n low center of gravity, and radically set-back mouth, this is a bevel-up plane, with a 12° bed angle similar to a Low Angle block plane.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The plane is 15\" long, 2 3\/4\" wide and weighs in at 5 lb 5 oz. You will appreciate the way this plane (with a toe that is one third the length of the sole) registers\n to the workpiece. The body is fully stress-relieved, ductile cast iron. With sides machined square to the sole, a specially shaped lever cap, and the machined thumb\n recess on either side of the body, it provides both comfort and excellent control when shooting.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The plane's adjustable mouth can be closed to a narrow slit\n for fine shavings with minimum tear-out or opened for heavier cuts. All of this can be done quickly and accurately with the front locking knob and the unique mouth\n adjustment screw. The large hardwood front knob and rear handle provide a comfortable grip. The adjustment mechanism, with its combined feed and lateral\n adjustment knob, makes blade setting easy and accurate. The set screws on either side of the blade prevent it from shifting in use, but allow full lateral\n adjustment.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Equipped with a lapped 25° blade, 2 1\/4\" wide by 3\/16\" (0.187\") thick, in PM-V11 tool steel.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Honing instructions for various cutting angles included.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Made in Canada.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Specifications\n  \u003c\/h5\u003e\n  \u003cul style=\"margin-top:-2px;\"\u003e\n   \u003cli\u003e\n    Stress-relieved, ductile Cast Iron Body\n   \u003c\/li\u003e\n   \u003cli\u003e\n    15\" long  x 2-3\/4\" wide\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Norris-type adjuster mechanism\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Adjustable mouth\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Hardwood tote and knob\n   \u003c\/li\u003e\n   \u003cli\u003e\n    12° bed angle\n   \u003c\/li\u003e\n   \u003cli\u003e\n    2-1\/4\" wide x 3\/16\" thick blade with 25° bevel\n   \u003c\/li\u003e\n   \u003cli\u003e\n    PM-V11 blade\n   \u003c\/li\u003e\n   \u003cli\u003e\n    7-1\/2 lbs\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch5\u003e\n   PM-V11 Steel\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   All of the Veritas bench, block and shoulder planes that we stock have PM-V11 steel blades. Veritas conducted extensive testing and determined that PM-V11 offers the best balance of hardness, edge retention and ease of sharpening in tool steels. It hones to a very fine edge and can easily be sharpened with commonly available sharpening abrasives.\n  \u003c\/p\u003e\n  \u003cp style=\"font-weight:bold; font-style:italic;\"\u003e\n   From Veritas\n  \u003c\/p\u003e\n  \u003cblockquote cite=\"https:\/\/www.leevalley.com\/en-us\/discover\/woodworking\/2020\/september\/the-pm-v11-story\"\u003e\n   PM-V11 is a powdered metal (PM) alloy. To form a PM alloy, constituent metals are melted and mixed together, then atomized, creating very small particles that cool and harden, forming a powder. This powder is screened to ensure consistent particle size, and then heated under pressure to form a billet. The billet is then rolled to the required thickness, ready to process as a conventionally smelted steel would be. The PM process yields a steel with a very fine grain structure that is uniform throughout.\n  \u003c\/blockquote\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Default Title","offer_id":50822130893082,"sku":"478270","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/478223-03d.jpg?v=1768343732"},{"product_id":"veritas-bevel-up-smoothing-plane","title":"Veritas Bevel-up Smoothing Plane","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Veritas Bevel-up Smoothing Plane\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   A nice complement to a Low Angle jack plane, the Veritas Bevel-Up Smoothing is the tool to use for the final finish on surfaces, especially woods with difficult grain patterns.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Dubbed the 164 1\/2H, it combines the generous width and weight (4 lb 14 oz) of a dedicated smoother with the versatile inner workings of a Low Angle bevel-up plane. The coffin-shaped body, with a 10\" x 3-1\/8\" sole, is made of fully stress-relieved ductile cast iron and has an exceptionally low center of gravity for smooth, stable cutting action. Accurately machined, the sole is flat and square to the sides.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The 12° bed angle, coupled with the 38° blade bevel, yields an effective cutting angle of 50°, often called (a\/the) York pitch. This is an ideal starting angle for minimizing tear-out on difficult wood. For the most difficult grains, even higher cutting angles can be achieved, by honing the blade with a higher micro-bevel.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The adjustable mouth can be closed to a narrow slit for fine shavings with minimal tear-out or opened for heavier cuts. A stop-screw in the throat adjusts to whatever mouth opening you find ideal for chip breaking and chip clearance. This lets you open the mouth fully for blade removal (sharpening or honing) and replacement, yet quickly restores your exact mouth setting. The large hardwood front knob and rear handle provide both comfort and excellent control. The adjustment mechanism, with its combined feed and lateral adjustment knob, makes blade setting easy and accurate. Set screws prevent the blade from shifting, but allow full lateral adjustment.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Includes a lapped 38° blade, 2-1\/4\" wide by 3\/16\" (0.187\") thick, in PM-V11 tool steel.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Made in Canada.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Specifications\n  \u003c\/h5\u003e\n  \u003cul style=\"margin-top:-2px;\"\u003e\n   \u003cli\u003e\n    Stress-relieved, ductile Cast Iron Body\n   \u003c\/li\u003e\n   \u003cli\u003e\n    10\" long  x 3-1\/8\" wide\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Norris-type adjuster mechanism\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Adjustable mouth\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Hardwood tote and knob\n   \u003c\/li\u003e\n   \u003cli\u003e\n    12° bed angle\n   \u003c\/li\u003e\n   \u003cli\u003e\n    2-1\/4\" wide x 3\/16\" thick blade with 38° bevel\n   \u003c\/li\u003e\n   \u003cli\u003e\n    PM-V11 blade\n   \u003c\/li\u003e\n   \u003cli\u003e\n    5 lbs\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch5\u003e\n   PM-V11 Steel\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   All of the Veritas bench, block and shoulder planes that we stock have PM-V11 steel blades. Veritas conducted extensive testing and determined that PM-V11 offers the best balance of hardness, edge retention and ease of sharpening in tool steels. It hones to a very fine edge and can easily be sharpened with commonly available sharpening abrasives.\n  \u003c\/p\u003e\n  \u003cp style=\"font-weight:bold; font-style:italic;\"\u003e\n   From Veritas\n  \u003c\/p\u003e\n  \u003cblockquote cite=\"https:\/\/www.leevalley.com\/en-us\/discover\/woodworking\/2020\/september\/the-pm-v11-story\"\u003e\n   PM-V11 is a powdered metal (PM) alloy. To form a PM alloy, constituent metals are melted and mixed together, then atomized, creating very small particles that cool and harden, forming a powder. This powder is screened to ensure consistent particle size, and then heated under pressure to form a billet. The billet is then rolled to the required thickness, ready to process as a conventionally smelted steel would be. The PM process yields a steel with a very fine grain structure that is uniform throughout.\n  \u003c\/blockquote\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Default Title","offer_id":50822131056922,"sku":"478229","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/478229-01d.jpg?v=1768343733"},{"product_id":"veritas-bevel-up-jointer-plane","title":"Veritas Bevel-up Jointer Plane","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Veritas Bevel-up Jointer Plane\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Low Angle jointer is the largest member of the Veritas bevel-up bench plane family. At 22\" x 2-7\/8\" and weighing 7 lb 8 oz, it is ideal for jointing edges and flattening large panels.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The body is fully stress-relieved ductile cast iron, with a sole that is flat and square to the sides. An adjustable throat plate allows a wide range of mouth adjustment. The unique stop-screw\n retains mouth settings while preventing blade damage when removing and replacing blades.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The bevel-up blade configuration results in a plane that is versatile and straightforward to use. The 12° bed angle, coupled with the 25° blade bevel, creates an effective cutting angle of\n 37°. Simply increasing the blade bevel results in higher cutting angles for improved performance in more difficult-grained woods.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Includes a lapped 3\/16\" (0.187\") thick blade, 2-1\/4\" wide,\n in PM-V11 tool steel.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Made in Canada.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Specifications\n  \u003c\/h5\u003e\n  \u003cul style=\"margin-top:-2px;\"\u003e\n   \u003cli\u003e\n    Stress-relieved, ductile Cast Iron Body\n   \u003c\/li\u003e\n   \u003cli\u003e\n    22\" long  x 2-7\/8\" wide\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Norris-type adjuster mechanism\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Adjustable mouth\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Hardwood tote and knob\n   \u003c\/li\u003e\n   \u003cli\u003e\n    12° bed angle\n   \u003c\/li\u003e\n   \u003cli\u003e\n    2-1\/4\" wide x 3\/16\" thick blade with 25° bevel\n   \u003c\/li\u003e\n   \u003cli\u003e\n    PM-V11 blade\n   \u003c\/li\u003e\n   \u003cli\u003e\n    7-1\/2 lbs\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch5\u003e\n   PM-V11 Steel\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   All of the Veritas bench, block and shoulder planes that we stock have PM-V11 steel blades. Veritas conducted extensive testing and determined that PM-V11 offers the best balance of hardness,\n edge retention and ease of sharpening in tool steels. It hones to a very fine edge and can easily be sharpened with commonly available sharpening abrasives.\n  \u003c\/p\u003e\n  \u003cp style=\"font-weight:bold; font-style:italic;\"\u003e\n   From Veritas\n  \u003c\/p\u003e\n  \u003cblockquote cite=\"https:\/\/www.leevalley.com\/en-us\/discover\/woodworking\/2020\/september\/the-pm-v11-story\"\u003e\n   PM-V11 is a powdered metal\n (PM) alloy. To form a PM alloy, constituent metals are melted and mixed together, then atomized, creating very small particles that cool and harden, forming a powder. This powder is screened\n to ensure consistent particle size, and then heated under pressure to form a billet. The billet is then rolled to the required thickness, ready to process as a conventionally smelted steel\n would be. The PM process yields a steel with a very fine grain structure that is uniform throughout.\n  \u003c\/blockquote\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Default Title","offer_id":50822131187994,"sku":"478230","price":389.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/478230-01d.jpg?v=1768343734"},{"product_id":"veritas-bevel-up-small-smoothing-plane","title":"Veritas Bevel-up Small Smoothing Plane","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Veritas Bevel-up Small Smoothing Plane\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   With a size comparable to a #3 bench plane, this Low Angle smoother is 9\" long, 2-5\/16\" wide and weighs only 2 lb 12 oz. Smaller and lighter than a full-size smoother, it is easier to maneuver and is less fatiguing to use for extended periods. Further, since the blade is narrower, at 1 3\/4\" wide, cuts are easier to push through.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Like the full-size versions, it is useful for final finishing of surfaces, end-grain work and for shooting miters. The machined and surface ground ductile cast iron body has a 12° bed angle and a movable toe fully enclosed by the body casting.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The locking front knob controls the toe to set the mouth opening, while an unobtrusive stop-screw in the throat allows repeatable mouth setting and prevents contact between the blade and toe. The Norris-type adjuster mechanism combines feed and lateral adjustments, making blade setting accurate and easy. Set screws on either side of the blade prevent shifting in use. The front knob and rear handle are hardwood.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   With an effective cutting angle of 37° to minimize fiber tearing, the included 25° bevel blade is 1\/8\" thick, lapped, in PM-V11 tool steel.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Made in Canada.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Specifications\n  \u003c\/h5\u003e\n  \u003cul style=\"margin-top:-2px;\"\u003e\n   \u003cli\u003e\n    Stress-relieved, ductile Cast Iron Body\n   \u003c\/li\u003e\n   \u003cli\u003e\n    9\" long  x 2-5\/16\" wide\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Norris-type adjuster mechanism\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Adjustable mouth\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Hardwood tote and knob\n   \u003c\/li\u003e\n   \u003cli\u003e\n    12° bed angle\n   \u003c\/li\u003e\n   \u003cli\u003e\n    1-3\/4\" wide x 1\/8\" thick blade with 25° bevel\n   \u003c\/li\u003e\n   \u003cli\u003e\n    PM-V11 blade\n   \u003c\/li\u003e\n   \u003cli\u003e\n    2-3\/4 lbs\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch5\u003e\n   PM-V11 Steel\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   All of the Veritas bench, block and shoulder planes that we stock have PM-V11 steel blades. Veritas conducted extensive testing and determined that PM-V11 offers the best balance of hardness, edge retention and ease of sharpening in tool steels. It hones to a very fine edge and can easily be sharpened with commonly available sharpening abrasives.\n  \u003c\/p\u003e\n  \u003cp style=\"font-weight:bold; font-style:italic;\"\u003e\n   From Veritas\n  \u003c\/p\u003e\n  \u003cblockquote cite=\"https:\/\/www.leevalley.com\/en-us\/discover\/woodworking\/2020\/september\/the-pm-v11-story\"\u003e\n   PM-V11 is a powdered metal (PM) alloy. To form a PM alloy, constituent metals are melted and mixed together, then atomized, creating very small particles that cool and harden, forming a powder. This powder is screened to ensure consistent particle size, and then heated under pressure to form a billet. The billet is then rolled to the required thickness, ready to process as a conventionally smelted steel would be. The PM process yields a steel with a very fine grain structure that is uniform throughout.\n  \u003c\/blockquote\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Default Title","offer_id":50822131319066,"sku":"478253","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/478253-01d.jpg?v=1768343735"},{"product_id":"veritas-low-angle-block-plane","title":"Veritas Low Angle Block Plane","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Veritas Low Angle Block Plane\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   This Low Angle block plane is a pleasure to use. With its 12° bed angle, it excels at end-grain work.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The tall side wings work well when shooting, and the comfortably shaped finger grips on the sides improve control. The combined blade advance and lateral adjust is the most sensitive, accurate adjustment mechanism available. Two guide screws prevent blade shifting. The ductile cast iron body can take hard knocks, and the adjustable nosepiece does not extend past the body, so it cannot be driven into the blade if you drop the plane. The plane is machined to exacting standards, the milled sides and sole surface ground to a fine finish.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Equipped with a chatterfree 25° blade in exceptional PM-V11 tool steel. For working difficult wood, lapped 38° and 50° bevel blades are available separately.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Made in Canada.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Specifications\n  \u003c\/h5\u003e\n  \u003cul style=\"margin-top:-2px;\"\u003e\n   \u003cli\u003e\n    Ductile Cast Iron Body\n   \u003c\/li\u003e\n   \u003cli\u003e\n    6-3\/8\" long  x 2\" wide\n   \u003c\/li\u003e\n   \u003cli\u003e\n    16 ounces\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Norris-type adjuster mechanism\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Brass knobs\n   \u003c\/li\u003e\n   \u003cli\u003e\n    12° bed angle\n   \u003c\/li\u003e\n   \u003cli\u003e\n    1-5\/8\" wide x 1\/8\" thick blade with 25° bevel\n   \u003c\/li\u003e\n   \u003cli\u003e\n    PM-V11 blade\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch5\u003e\n   PM-V11 Steel\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   All of the Veritas bench, block and shoulder planes that we stock have PM-V11 steel blades. Veritas conducted extensive testing and determined that PM-V11 offers the best balance of hardness, edge retention and ease of sharpening in tool steels. It hones to a very fine edge and can easily be sharpened with commonly available sharpening abrasives.\n  \u003c\/p\u003e\n  \u003cp style=\"font-weight:bold; font-style:italic;\"\u003e\n   From Veritas\n  \u003c\/p\u003e\n  \u003cblockquote cite=\"https:\/\/www.leevalley.com\/en-us\/discover\/woodworking\/2020\/september\/the-pm-v11-story\"\u003e\n   PM-V11 is a powdered metal (PM) alloy. To form a PM alloy, constituent metals are melted and mixed together, then atomized, creating very small particles that cool and harden, forming a powder. This powder is screened to ensure consistent particle size, and then heated under pressure to form a billet. The billet is then rolled to the required thickness, ready to process as a conventionally smelted steel would be. The PM process yields a steel with a very fine grain structure that is uniform throughout.\n  \u003c\/blockquote\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Default Title","offer_id":50822131515674,"sku":"478206","price":189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/478206-02d.jpg?v=1768343737"},{"product_id":"veritas-standard-angle-block-plane","title":"Veritas Standard Angle Block Plane","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Veritas Standard Angle Block Plane\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   For general-purpose work, the standard block plane is 1\/8\" taller than the Low Angle version and has a 20° bed angle and a low-profile lever cap that fits the hand well.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The tall side wings are ideal for shooting, and finger grips in the sides improve control. The combined blade advance and lateral adjust is the most sensitive, accurate adjustment mechanism available. Two guide screws prevent blade shifting. The ductile cast iron body can take hard knocks, and the adjustable nosepiece does not extend past the body, so it cannot be driven into the blade if you drop the plane. The plane is machined to exacting standards, the milled sides and sole surface ground to a fine finish.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Equipped with a chatter-free 25° blade in exceptional PM-V11 tool steel. For working difficult wood, lapped 38° and 50° bevel blades are available separately.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Made in Canada.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Specifications\n  \u003c\/h5\u003e\n  \u003cul style=\"margin-top:-2px;\"\u003e\n   \u003cli\u003e\n    Ductile Cast Iron Body\n   \u003c\/li\u003e\n   \u003cli\u003e\n    6-3\/8\" long  x 2\" wide\n   \u003c\/li\u003e\n   \u003cli\u003e\n    28 ounces\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Norris-type adjuster mechanism\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Brass knobs\n   \u003c\/li\u003e\n   \u003cli\u003e\n    20° bed angle\n   \u003c\/li\u003e\n   \u003cli\u003e\n    1-5\/8\" wide x 1\/8\" thick blade with 25° bevel\n   \u003c\/li\u003e\n   \u003cli\u003e\n    PM-V11 blade\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch5\u003e\n   PM-V11 Steel\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   All of the Veritas bench, block and shoulder planes that we stock have PM-V11 steel blades. Veritas conducted extensive testing and determined that PM-V11 offers the best balance of hardness, edge retention and ease of sharpening in tool steels. It hones to a very fine edge and can easily be sharpened with commonly available sharpening abrasives.\n  \u003c\/p\u003e\n  \u003cp style=\"font-weight:bold; font-style:italic;\"\u003e\n   From Veritas\n  \u003c\/p\u003e\n  \u003cblockquote cite=\"https:\/\/www.leevalley.com\/en-us\/discover\/woodworking\/2020\/september\/the-pm-v11-story\"\u003e\n   PM-V11 is a powdered metal (PM) alloy. To form a PM alloy, constituent metals are melted and mixed together, then atomized, creating very small particles that cool and harden, forming a powder. This powder is screened to ensure consistent particle size, and then heated under pressure to form a billet. The billet is then rolled to the required thickness, ready to process as a conventionally smelted steel would be. The PM process yields a steel with a very fine grain structure that is uniform throughout.\n  \u003c\/blockquote\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Default Title","offer_id":50822131679514,"sku":"478207","price":189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/478207-02d.jpg?v=1768343738"},{"product_id":"veritas-apron-plane","title":"Veritas Apron Plane","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Veritas Apron Plane\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   This small, Low Angle block plane is ideal for trim carpentry. At 14 oz it is half the weight of a standard block plane, a big plus if you carry it in your apron all day.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The 5-1\/2\"x 1-3\/4\" ductile cast iron body takes knocks in stride. It has good hand feel; unique side wings allow for a comfortable and firm grip while providing side-stability for shooting. A combined feed and lateral adjustment mechanism makes setting easy and accurate.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Featuring a 12° bed angle and equipped with a lapped 25° bevel blade made of PM-V11 tool steel. The PM-V11 blade is 1\/8\" thick and 1-1\/4\" wide.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Made in Canada.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Specifications\n  \u003c\/h5\u003e\n  \u003cul style=\"margin-top:-2px;\"\u003e\n   \u003cli\u003e\n    Ductile Cast Iron Body\n   \u003c\/li\u003e\n   \u003cli\u003e\n    5-1\/4\" long  x 1-3\/4\" wide\n   \u003c\/li\u003e\n   \u003cli\u003e\n    14 ounces\n   \u003c\/li\u003e\n   \u003cli\u003e\n    12° bed angle\n   \u003c\/li\u003e\n   \u003cli\u003e\n    1-1\/4\" wide x 1\/8\" thick blade with 25° bevel\n   \u003c\/li\u003e\n   \u003cli\u003e\n    PM-V11 steel blade\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch5\u003e\n   PM-V11 Steel\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   All of the Veritas bench, block and shoulder planes that we stock have PM-V11 steel blades. Veritas conducted extensive testing and determined that PM-V11 offers the best balance of hardness, edge retention and ease of sharpening in tool steels. It hones to a very fine edge and can easily be sharpened with commonly available sharpening abrasives.\n  \u003c\/p\u003e\n  \u003cp style=\"font-weight:bold; font-style:italic;\"\u003e\n   From Veritas\n  \u003c\/p\u003e\n  \u003cblockquote cite=\"https:\/\/www.leevalley.com\/en-us\/discover\/woodworking\/2020\/september\/the-pm-v11-story\"\u003e\n   PM-V11 is a powdered metal (PM) alloy. To form a PM alloy, constituent metals are melted and mixed together, then atomized, creating very small particles that cool and harden, forming a powder. This powder is screened to ensure consistent particle size, and then heated under pressure to form a billet. The billet is then rolled to the required thickness, ready to process as a conventionally smelted steel would be. The PM process yields a steel with a very fine grain structure that is uniform throughout.\n  \u003c\/blockquote\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Default Title","offer_id":50822131810586,"sku":"478210","price":126.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/478210-01d.jpg?v=1768343740"},{"product_id":"veritas-dx60-block-plane","title":"Veritas DX60 Block Plane","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Veritas DX60 Block Plane\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Made to exacting standards with refined stainless-steel hardware, this is one of the finest Veritas block planes.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The knobs and wheels have elegant elliptical knurled edges for a firm grip. The lever cap has been extensively redesigned to integrate cleanly with the plane body and provide an almost continuous hand-contact surface, with tactile cues for finger placement. The Norris-type adjuster mechanism combines feed and lateral adjustments, making blade setting accurate and easy. Close manufacturing tolerances reduce backlash to no more than 1\/4 turn. The adjuster is locked to the body, and will not become inadvertently unseated.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Mouth adjustment is effected by loosening the stainless-steel locking knob. An unobtrusive set screw in the throat of the plane allows repeatable mouth positioning while at the same time preventing the moveable toe from contacting the blade. The toe is completely enclosed by the body casting.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Made from ductile iron, the contoured body is 6-5\/8\" long by 1-3\/4\" wide with a 12° bed angle, and is finished with a durable powder-coat polymer paint. It is machined and surface ground to half our normal flatness and surface finish specifications; the sole and sides are flat and square to within +0.000\" and -0.0015\" over the entire surface. It comes with a 9\/64\" (0.14\") thick by 1-3\/8\" wide blade with a 25° primary bevel in PM-V11 tool steel. The back of the blade is lapped flat within ±0.0002\" (two-tenths of a thousandth of an inch) in the working area of the blade. The lever cap is die cast.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Made in Canada.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Specifications\n  \u003c\/h5\u003e\n  \u003cul style=\"margin-top:-2px;\"\u003e\n   \u003cli\u003e\n    Ductile Cast Iron Body\n   \u003c\/li\u003e\n   \u003cli\u003e\n    6-5\/8\" long  x 1-3\/4\" wide\n   \u003c\/li\u003e\n   \u003cli\u003e\n    28 ounces\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Sole \u0026amp; sides are flat and square to within +0.000\" and -0.0015\" over entire surface\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Norris-type adjuster mechanism\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Stainless steel knobs\n   \u003c\/li\u003e\n   \u003cli\u003e\n    12° bed angle\n   \u003c\/li\u003e\n   \u003cli\u003e\n    1-3\/8\" wide x 0.140\" (9\/64\") thick blade with 23° primary and 25° secondary bevels\n   \u003c\/li\u003e\n   \u003cli\u003e\n    PM-V11 blade\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch5\u003e\n   PM-V11 Steel\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   All of the Veritas bench, block and shoulder planes that we stock have PM-V11 steel blades. Veritas conducted extensive testing and determined that PM-V11 offers the best balance of hardness, edge retention and ease of sharpening in tool steels. It hones to a very fine edge and can easily be sharpened with commonly available sharpening abrasives.\n  \u003c\/p\u003e\n  \u003cp style=\"font-weight:bold; font-style:italic;\"\u003e\n   From Veritas\n  \u003c\/p\u003e\n  \u003cblockquote cite=\"https:\/\/www.leevalley.com\/en-us\/discover\/woodworking\/2020\/september\/the-pm-v11-story\"\u003e\n   PM-V11 is a powdered metal (PM) alloy. To form a PM alloy, constituent metals are melted and mixed together, then atomized, creating very small particles that cool and harden, forming a powder. This powder is screened to ensure consistent particle size, and then heated under pressure to form a billet. The billet is then rolled to the required thickness, ready to process as a conventionally smelted steel would be. The PM process yields a steel with a very fine grain structure that is uniform throughout.\n  \u003c\/blockquote\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Default Title","offer_id":50822131974426,"sku":"478212","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/478212-01d.jpg?v=1768343741"},{"product_id":"veritas-spokeshaves","title":"Veritas Spokeshaves","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Veritas Spokeshaves\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Veritas spokeshaves are designed for smooth, effective shaping. High-quality manufacturing ensures they are easy to use - no fettling required. The 1\/8\" thick PM-V11 blade machined lever cap and flat blade bed result in chatter-free cutting in nearly all conditions.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The ductile cast iron body is fitted with hardwood handles. You can rest you thumb on the toe so you can choke up on the body for fine control. Twin adjustment wheels precisely control blade depth and skew. Adjust the mouth as needed with the included shims.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Flat and Round Spokshaves\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   Flat and round spokseshaves use a 2-1\/8\" wide blade. The flat spokeshave is primarily used for shaping flat or convex surfaces. The sole of the round shave is curved from front to back at a radius of 1-3\/4\" so it can be used to shape concave surfaces.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   These are the spokeshaves that most woodworkers will use.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Concave\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   The sole of the concave spokeshave is a concave curve from left to right with a radius of 1-5\/16\". It is used for shaping  spindles.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Made in Canada.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Specifications\n  \u003c\/h5\u003e\n  \u003cul style=\"margin-top:-2px;\"\u003e\n   \u003cli\u003e\n    Ductile Cast Iron Body\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Hardwood handles\n   \u003c\/li\u003e\n   \u003cli\u003e\n    10-1\/2\" long\n   \u003c\/li\u003e\n   \u003cli\u003e\n    45° bed angle\n   \u003c\/li\u003e\n   \u003cli\u003e\n    2-1\/8\" wide x 1\/8\" thick - Flat and Round spokeshaves\n   \u003c\/li\u003e\n   \u003cli\u003e\n    1-1\/2\" wide x 1\/8\" thick - Concave spokeshave\n   \u003c\/li\u003e\n   \u003cli\u003e\n    PM-V11 blade\n   \u003c\/li\u003e\n   \u003cli\u003e\n    12 oz\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch5\u003e\n   PM-V11 Steel\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   All of the Veritas spokeshaves, bench planes, block planes and shoulder planes that we stock have PM-V11 steel blades. Veritas conducted extensive testing and determined that PM-V11 offers the best balance of hardness, edge retention and ease of sharpening in tool steels. It hones to a very fine edge and can easily be sharpened with commonly available sharpening abrasives.\n  \u003c\/p\u003e\n  \u003cp style=\"font-weight:bold; font-style:italic;\"\u003e\n   From Veritas\n  \u003c\/p\u003e\n  \u003cblockquote cite=\"https:\/\/www.leevalley.com\/en-us\/discover\/woodworking\/2020\/september\/the-pm-v11-story\"\u003e\n   PM-V11 is a powdered metal (PM) alloy. To form a PM alloy, constituent metals are melted and mixed together, then atomized, creating very small particles that cool and harden, forming a powder. This powder is screened to ensure consistent particle size, and then heated under pressure to form a billet. The billet is then rolled to the required thickness, ready to process as a conventionally smelted steel would be. The PM process yields a steel with a very fine grain structure that is uniform throughout.\n  \u003c\/blockquote\u003e\n  \u003c!--mfg propagandaThese beautiful spokeshaves are easy to use and are designed for smooth, effectiveshaping. The 1\/8 thick blade, machined lever cap, and blade bed achieve chatterfreecutting in virtually all conditions. The ductile cast iron body has hardwood handles,and the toe serves as a thumb rest, allowing the user to choke up on the body to attainexceptional control for fi ne work. Twin adjustment wheels quickly and accuratelycontrol cut depth and skew, and shims let you adjust the mouth opening as needed.The concave spokeshave, with a 45\u0026deg; bed angle, a sole radius of 15\/16, and a 11\/2wide blade, is popular with chair and paddle makers. The fl at and round spokeshaveshave a 21\/8 wide blade and are suited to most kinds of woodworking. Theround shave has a 13\/4 radius. Each spokeshave weighs about 12 oz and is 101\/2long overall. Available with an A2, O1 or PM-V11® tool steel blade--\u003e\n  \u003c!--\u003cp\u003e\u003cb\u003eFLAT\u003c\/b\u003e\u003cp\u003eThe Veritas flat spokeshave will quickly become a favorite as it is so easy to use. Designed for smooth, effective shaping of chair spindles, panel edges, paddles and tool handles, or other shaping, it has a 1\/8\" thick blade, machined lever cap, and blade bed that achieve chatterfree cutting in virtually all conditions.\u003cp\u003eThe ductile cast iron body is fitted with bubinga handles, shaped for comfort and control. The toe serves as a thumb rest, allowing you to choke up on the body to attain exceptional control for fine work. Twin adjustment wheels quickly and accurately control cut depth and skew, and shims let you adjust the mouth opening as needed.\u003cp\u003eThe flat spokeshave has a 2 1\/8\" wide PM-V11 tool steel blade, is 10 1\/2\" long overall, and weighs about 12 oz.\u003cp\u003eMade in Canada.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eCURVED\u003c\/b\u003e\u003cp\u003eThe Veritas round spokeshave will quickly become a favorite as it is so easy to use. Designed for smooth, effective shaping of chair spindles, panel edges, paddles and tool handles, or other shaping, it has a 1\/8\" thick blade, machined lever cap, and blade bed that achieve chatterfree cutting in virtually all conditions.\u003cp\u003eThe ductile cast iron body is fitted with bubinga handles, shaped for comfort and control. The toe serves as a thumb rest, allowing the user to choke up on the body to attain exceptional control for fine work. Twin adjustment wheels quickly and accurately control cut depth and skew, and shims let you adjust the mouth opening as needed.\u003cp\u003eWith a 1 3\/4\" radius, the spokeshave has a 2 1\/8\" wide PM-V11 tool steel blade, is 10 1\/2\" long overall, and weighs about 12 oz.\u003cp\u003eMade in Canada.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eCONCAVE\u003c\/b\u003e\u003cp\u003eThe Veritas concave spokeshave will quickly become a favorite as it is so easy to use. Designed for smooth, effective shaping, it is popular with chair and paddle makers; it is the first choice for a wide range of jobs from small spindles to large oars. The 1\/8\" thick blade, machined lever cap, and blade bed achieve chatterfree cutting in virtually all conditions.\u003cp\u003eThe ductile cast iron body is fitted with hardwood handles, shaped for comfort and control. The toe serves as a thumb rest, allowing the user to choke up on the body to attain exceptional control for fine work. Twin adjustment wheels quickly and accurately control cut depth and skew, and shims let you adjust the mouth opening as needed.\u003cp\u003eThe spokeshave has a 45\u0026deg; bed angle, a sole radius of 1 5\/16\", and a 1 1\/2\" wide PM-V11 tool steel blade. Measures 10 1\/2\" long overall and weighs about 12 oz.--\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Flat Bottom","offer_id":50822132662554,"sku":"478219","price":155.0,"currency_code":"USD","in_stock":true},{"title":"Curved Bottom","offer_id":50822132695322,"sku":"478220","price":155.0,"currency_code":"USD","in_stock":true},{"title":"Concave","offer_id":50822132728090,"sku":"478221","price":165.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/veritas-spokeshaves-01d.jpg?v=1768343752"},{"product_id":"veritas-chair-devil","title":"Veritas Chair Devil","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Veritas Chair Devil\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   They say the Devil is in the details and the Veritas Chair Devils are wonderful tools for final shaping and smoothing of round parts such as chair spindles and posts giving a smooth finish anyone can appreciate. The specially shaped scraper blade rounds the workpiece, removing any spokeshave marks which make them an excellent spokeshave companion.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The machined steel bodies are fitted with hardwood handles shaped for comfort and control when either pulling or pushing. The machined toe and the two thumbscrews are solid brass. The high-carbon steel blades are 0.040\" thick, hardened to Rc48-52, and come with a finely ground 45° cutting edge.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Offered in three sizes: the 1\/2\" diameter for spindles, the 7\/8\" diameter for rungs, and the 1 1\/4\" diameter for legs and posts, as well as canoe paddle shafts. Full instructions included.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Made in Canada.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Specifications\n  \u003c\/h5\u003e\n  \u003cul style=\"margin-top:-2px;\"\u003e\n   \u003cli\u003e\n    Machined Steel Body\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Hardwood handles\n   \u003c\/li\u003e\n   \u003c!--\u003cli\u003eXXXXX\" long\u003c\/li\u003e--\u003e\n   \u003cli\u003e\n    0.040\" thick Rc48-52 High-carbon steel blades with 45° cutting angle\n   \u003c\/li\u003e\n   \u003c!--\u003cli\u003eXXXXX oz\u003c\/li\u003e--\u003e\n   \u003cli\u003e\n    Made in Canada\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"1\/2 inch","offer_id":50822132826394,"sku":"478215","price":92.0,"currency_code":"USD","in_stock":true},{"title":"7\/8 inch","offer_id":50822132859162,"sku":"478217","price":92.0,"currency_code":"USD","in_stock":true},{"title":"1-1\/4 inch","offer_id":50822132891930,"sku":"478218","price":92.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/veritas-chair-devils-01d.jpg?v=1768343754"},{"product_id":"tall-front-knob-veritas-block-plane","title":"Tall Front Knob for Veritas Low Angle Block Plane","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Tall Front Knob for Veritas Low Angle Block Plane\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The bevel-up configuration of the Veritas Low Angle block plane lets you vary the blade angle to suit the task, from Low Angle blades for use on end grain to high-angle blades on figured wood. However, steeper cutting angles require more force to push the plane which can be a challenge for some.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   These inexpensive hardwood grips adapt the Low Angle block plane into a small bevel-up smoothing plane that can work a wide variety of woods, providing the firm hold and greater leverage needed to plane difficult wood. Retrofitted with this tall front knob and a vertical tote (available separately), the plane works similarly to a #3 smoothing plane for small-scale work, working in tight areas and for easier application of force.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Made in Canada.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Default Title","offer_id":50822133416218,"sku":"478201","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/478201-01.jpg?v=1768343759"},{"product_id":"chamfer-guide-veritas-block-plane","title":"Chamfer Guide for Veritas Standard and Low Angle Block Planes","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Chamfer Guide for Veritas Standard and Low Angle Block Planes\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   You can convert our Veritas Low Angle block plane and standard block plane into chamfer planes in seconds with this cunning guide made of anodized aluminum.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Easy to install - you first set the chamfer width on the guide, then install the guide by unscrewing the front knob of the plane, replacing the toe piece with the chamfer guide and tightening the knob again.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Adjustable for chamfers up to 1\/2\" wide, the guide wings are fixed at a 90° angle to hold the plane body at a consistent 45° to the work face.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Made in Canada.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Default Title","offer_id":50822133514522,"sku":"478202","price":31.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/478202-01d.jpg?v=1768343761"},{"product_id":"vertical-tote-veritas-block-plane","title":"Vertical Tote for Veritas Low Angle Block Plane","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Vertical Tote for Veritas Low Angle Block Plane\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The bevel-up configuration of the Veritas Low Angle block plane lets you vary the blade angle to suit the task, from Low Angle blades for use on end grain to high-angle blades on figured wood. However, steeper cutting angles require more force to push the plane.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Made of torrefied maple, this inexpensive vertical tote, when used with a front knob, adapts the low angle block plane into a small bevel-up smoothing plane capable of working a wide variety of woods, providing a firm hold and greater leverage needed to plane difficult wood. Used with these simple retrofits, the plane works similarly to a #3 smoothing plane for small-scale work, working in tight areas, and for use by children or those with small hands or less strength.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Combined with a selection of optional blades, they convert our Low Angle block plane into a highly versatile plane that is easy and comfortable to use.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Made in Canada.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Default Title","offer_id":50822133645594,"sku":"478203","price":44.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/478203-01d.jpg?v=1768343762"},{"product_id":"veritas-large-router-plane","title":"Veritas Large Router Plane","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Veritas Large Router Plane\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   A modern re-imagining of the Stanley #71, the Veritas large router plane is an invaluable tool for work on stopped or through dadoes and grooves, or for any work that\n requires an area cut to a precise depth.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The blade depth is regulated by a fine screw feed that travels 1\/32\" per turn for\n precise adjustment, with the resulting depth of cut controlled by a locking depth stop. Unique to the large router plane is\n a spring-loaded blade-clamping collar that holds the blade in position when the collar is loosened. It provides tactile\n feedback, allowing controlled blade adjustment to a depth of 1\". The collar can also be set to fully release for quick and\n easy blade removal, for repositioning in front of the post for general work, behind the post for bullnose applications, or\n laterally (left or right) for work on hinge gains.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Made to the same high standards as all Veritas planes, the ductile cast iron body has been accurately machined and ground flat.\n Weight is 2 lb. The large wooden knobs are positioned to provide both comfort and excellent control. If you would like to\n customize a pair of handles, a hardware kit that includes two turned brass connectors, two hanger bolts, a hex bolt, and\n a mandrel for lathe mounting is available separately.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The plane includes two high-carbon steel cutters: a two-piece 1\/2\" straight blade, and a two-piece 1\/2\" spear-point blade\n (for final smoothing). A blade sharpening jig is also included. The optional fence (available separately) made of stainless\n steel and aluminum can be positioned on either side of the plane and will work on both straight and curved pieces. In addition\n to using for dadoes or grooves, our router plane is the perfect tool for inlay or intarsia work, or for cleaning out areas\n for hardware installation, where fine control is critical.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Made in Canada (except for blades).\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Specifications\n  \u003c\/h5\u003e\n  \u003cul style=\"margin-top:-2px;\"\u003e\n   \u003cli\u003e\n    Ductile Cast Iron Body\n   \u003c\/li\u003e\n   \u003c!--\u003cli\u003e8\" long  x 1-1\/4\" wide\u003c\/li\u003e--\u003e\n   \u003cli\u003e\n    1\/2\" high-carbon steel straight cutter\n   \u003c\/li\u003e\n   \u003cli\u003e\n    1\/2\" high-carbon steel spear-point cutter\n   \u003c\/li\u003e\n   \u003cli\u003e\n    2lb\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Default Title","offer_id":50822133940506,"sku":"478231","price":205.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/478231-01d.jpg?v=1768343765"},{"product_id":"fence-veritas-large-router-plane","title":"Fence for Veritas Large Router Plane","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Fence for Veritas Large Router Plane\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The optional fence for the Veritas large router plane, made of stainless steel and aluminum, can be positioned on either side of the plane and will work on both straight and curved pieces.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Made in Canada.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Default Title","offer_id":50822134268186,"sku":"478235","price":26.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/478235-01d.jpg?v=1768343767"},{"product_id":"handle-kit-veritas-large-router-plane","title":"Handle Hardware Kit for Veritas Large Router Plane","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Handle Hardware Kit for Veritas Large Router Plane\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   If you would like to customize a pair of handles for the Veritas large router plane, this hardware kit includes two\n turned brass connectors, two hanger bolts, a hex bolt, and a mandrel for lathe mounting.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Made in Canada.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Default Title","offer_id":50822134333722,"sku":"478237","price":8.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/478237-01d.jpg?v=1768343767"},{"product_id":"inlay-cutter-head-veritas-large-router-plane","title":"Inlay Cutter Head for Veritas Large Router Plane","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Inlay Cutter Head for Veritas Large Router Plane\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   This simple attachment for the Veritas large router plane lets you score a shallow groove to accept inlaid purfling, banding\n or stringing, taking advantage of the plane’s fence and depth-adjustment mechanism to precisely control groove position and\n depth.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The cutter head holds a pair of included single-bevel slicing blades that score crisply defined groove outlines across, with\n or diagonal to the grain. By using a chisel or switching to a standard router plane blade matching or smaller than the width\n of the desired groove, you can quickly hog out the waste between the scored lines.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   An included set of shims and spacers lets you set blade spacing to define groove widths from 1\/16\" to 15\/32\" (1.5mm to 12mm).\n Set includes five each of four sizes of plastic shims (0.002\", 0.005\", 0.01\", 0.02\") and one each of 0.04\", 0.08\" and 0.12\"\n steel spacers.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   To score a groove parallel to a straight edge, a fence (available as an optional accessory for the Veritas large router plane)\n is used to guide the cutter blades at a consistent offset from the work edge. For following curved edges, a non-marring brass\n stylus (included with the inlay cutter head) can be threaded onto the fence rod in place of the straight fence.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Replacement blades available (sold individually).\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Made in Canada.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Default Title","offer_id":50822134464794,"sku":"478250","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/478250-01d.jpg?v=1768343769"},{"product_id":"blade-veritas-large-router-plane","title":"Blades for Veritas Router Planes","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Blades for Veritas Router Planes\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   These high-carbon steel router plane blades fit the Veritas Large Router Plane, as well as Stanley #71 router planes (with the height-adjustment nut inverted).\n  \u003c\/p\u003e\n  \u003cp\u003e\n   1\/2\" blades are a two-piece design. The spear-point blade is used for final smoothing.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   1\/2\" blades are made in Canada. Other sizes are made in Taiwan.\n  \u003c\/p\u003e\n  \u003c!--\nmfg propganda\n\nOur high-carbon steel router plane blades fit our Veritas large and medium router planes and our Veritas hinge mortise plane, as well as Stanley #71 router planes (with the height-adjustment nut inverted).\n\nThe 1\/2\" blades have a two-piece design and are available in two styles: straight and spear-point (for final smoothing). The 3\/4\" blade is straight and of a two-piece design. Sizes stated are nominal.\n\n--\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"1\/16 inch Straight","offer_id":50822134595866,"sku":"478240","price":23.0,"currency_code":"USD","in_stock":true},{"title":"3\/32 inch Straight","offer_id":50822134628634,"sku":"478241","price":23.0,"currency_code":"USD","in_stock":true},{"title":"1\/8 inch - 3mm Straight","offer_id":50822134661402,"sku":"478242","price":23.0,"currency_code":"USD","in_stock":true},{"title":"3\/16 inch Straight","offer_id":50822134694170,"sku":"478243","price":23.0,"currency_code":"USD","in_stock":true},{"title":"1\/4 inch Straight","offer_id":50822134726938,"sku":"478232","price":23.0,"currency_code":"USD","in_stock":true},{"title":"1\/2 inch Straight","offer_id":50822134759706,"sku":"478233","price":22.0,"currency_code":"USD","in_stock":true},{"title":"1\/2 inch Spear Point","offer_id":50822134792474,"sku":"478234","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/veritas-large-router-plane-blades-01d.jpg?v=1768343773"},{"product_id":"depth-stop-veritas-large-router-plane","title":"Depth Stop Collar Assembly for Veritas Large Router Plane","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Depth Stop Collar Assembly for Veritas Large Router Plane\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The stop collar fits on the depth adjustment screw of the\n   \u003ca data-prev-url=\"\/veritas-large-router-plane.aspx\" href=\"\/products\/veritas-large-router-plane\" large=\"\" plane=\"\" router=\"\" veritas=\"\"\u003e\n    and controls the maximum depth of cut.\n   \u003c\/a\u003e\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Default Title","offer_id":51854446821658,"sku":"478238","price":9.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/478238-01d.jpg?v=1774105110"}],"url":"https:\/\/www.highlandwoodworking.mom\/collections\/veritas-hand-planes.oembed","provider":"Highland Woodworking","version":"1.0","type":"link"}